SFP TRANSCEIVER MODULES AND DIRECT ATTACH CABLES

SFP is defined as Small Form-Factor Pluggable. SFP are 1Gig and SFP+ refers to 10G transceivers. SFP transceivers are typically used in network switches, media converters, and AV over fiber systems. SFP transceivers are specific to a format of fiber (multimode or single mode) SFP transceivers when connected to media converters allows ethernet and fiber technologies to communicate. Direct Attach Cables are passive copper cables that are preterminated with SFP or SFP+ transceivers on both ends. SCP SFP/SFP+ transceivers are programmed with CISCO standard EEPROMs and are compatible with most systems.

Part No. Explanation: SFP= Small Form-Factor Pluggable; 1G & 10G= 1G or 10G transceivers; MM= Multimode; SM= Single Mode; DAC= Direct Attach Cable

View as Grid List

7 Items

per page
Set Descending Direction
  1. F-SFP1G-MM
    F-SFP1G-MM

    1GBASE-SX SFP 850NM 550M DOM TRANSCEIVER -- MULTIMODE FIBER - 1EA

    The F-SFP1G-MM multi-mode transceivers are small form factor pluggable module for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASESX and Fiber Channel FC-PH-2 for 100-M5-SN-1 and 100-M6-SN-1. It features a SFP 20-pin connector to allow hot plug capability. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850nm. 

    Learn More
  2. F-SFP1G-SM
    F-SFP1G-SM

    1GBASE-LX/LH SFP 1310NM 20KM DOM TRANSCEIVER -- SINGLE MODE FIBER - 1EA

    The F-SFP1G-SM single-mode transceivers are small form factor pluggable modules for bi-directional serial optical data communications such as Gigabit Ethernet 1000BASE-LX and Fiber Channel 1x SM-LC-LFC-PI. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm.

    Learn More
View as Grid List

7 Items

per page
Set Descending Direction