998-DO-EXT

48Gbps HDMI Dongle Adapter Extender Kit - TX & RX 8K Dongles, Supports v2.1. HDMI Type A (m) / MPO (f), (2) USB Power cables and (1) Pulling Capsule. EasyFiber patch cable sold separately - 1 Kit/Box

*SCP-EasyFiber patch cable sold separately

DESCRIPTION

The 998-DO-EXT dongle adapter extender kit is the most advanced and competitive solution on the market. The optic fiber cable is thinner, more flexible, and outperforms other brands.

The 998-DO-EXT supports the latest HDMI standards including 8K@60, 4:2:0, 48Gbps, Dynamic HDR, Multi-Channel Audio, EDID, CEC, HDCP2.3, e-ARC.

The 998-DO-EXT consists of a set of two HDMI type A to MPO Female dongle adapters. This design is easy to install and easy to upgrade.

KEY FEATURES

• T-Grip for HDMI plug
• 8K@ 60 4: 2: 0 48Gbps
• Plug and Play Installation
• Thinner, Lighter and More Flexible
• Detachable design Dongle - HDMI Type A (m) /MPO (f)
• High EMI protection
• External Power for high compatibility
• HDR, EDID, CEC HDCP2.3, eARC

APPLICATIONS

• Digital Signage
• LED signboards in streets and in stadiums
• Medical Imaging Equipment
• Airplane On-board Video System
• Home Theater
• Blu-ray, 3D video, Projector, Set-up box, DVR, Game Consoles and Computer Systems
• TV Broadcast Station
• Conference Room Video Equipment
• Security systems

INCLUDED IN BOX

• (1set) 998-DO-EXT
• (2pc) MPO Protector
• (1pc) Pulling Capsule
• (2pc) Power Cord for 5V power supply
• (1pc) Installation Manual

PLUG-AND-PLAY INSTALLATION

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI port (for example, a PC, laptop, DVD/Blu-ray player or any other video/audio signal source device). Important: 998-DO-EXT can be damaged if it is excessively pinched or twisted when being installed and after being installed. Make sure not to bend or twist the cable tightly. 

INSTALLATION

The 998-DO-EXT HDMI dongle extender kit is designed to work with the specially designed SCP pre-terminated SCP-EasyFiber™ patch cords with  MPO connectors (Part number series EFP-998-P-XX and EFP-998-LSZH-XX). SCP EasyFiber is an ultra-bendable optical fiber that is designed for in-wall or outdoor installations. The SCP-EasyFiber MPO patch cables are Indoor/Outdoor rated and is available in UL OFNP and/or LSZH with B2ca EuroClass rating.

1. Unpack the dongle extenders from the box. Notice that one dongle is for the Display side and the other is for the Source side.

2. Remove the MPO/MPO SCP-EasyFiber™ patch cable. (sold separately)

3. For in-wall installations, use the Pulling Capsule by inserting the MPO connector into the plastic capsule and close. The EasyFiber patch cable can then be pulled through conduit or installed without conduit behind walls. When installing be sure to always use the pulling capsule as it protects the MPO connector ends.

4. After the EasyFiber patch cable has been installed to the Display and Source device, attach the Display Dongle end to the MPO connector by the Display. Install the Source Dongle end to the MPO connector at the Source device.

5. Remove the (2) USB External Power cords from the box. The 998-DO-EXT dongles require USB external power at the Display device. Plug the power jack into the Display dongle and attach the USB end to the USB port on the Display. [If necessary, USB power may be needed at the Source end as well.]

6. Insert the HDMI connector ends into the HDMI or FRL port on both the Display and Source.

7. DO NOT plug the Display dongle into the Source device and DO NOT plug the Source dongle into the Display device.

8. Power up both the Source and Display devices after Dongles have been connected. If required, connect the USB external power on the Source dongle and Source device USB socket.

Note: The SCP EasyFiber MPO patch cables are available in various lengths. These cables can be daisy chained up to 1000ft/300m. To daisy chain, use the MPO coupler (part EFP-MPO-COU) that can be ordered separately.