10GBASE-SR SFP+ 850NM 300M DOM TRANSCEIVER – MULTIMODE FIBER – 1EA

SFP+ 10G Transceivers – Generic/Cisco Standard EEPROM

PRODUCT SUMMARY

The F-SFP10G-MM transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

The transceiver is alimiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceivers are compliant per the RoHS Directive 2011/65/EU.

FEATURES & BENEFITS

• Hot-pluggable SFP+ footprint
• Supports 9.95 to 10.5 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range 0 to 70°C
• Single 3.3V power supply
• Maximum link length of 300m on 2000 MHZ-km OM3 MMF
• Heated 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC connector
• Built-in digital diagnostic functions

SPECIFICATIONS

Form Type – SFP+
Max Data Rate – 10.3125 Gbps
Wavelength – 850nm
Max Cable Distance – 300m over OM3 MMF
Interface – LC duplex
Optical Components – VCSEL 850nm
Cable Type – MMF
DOM Support – Yes
TX Power: -7.3~-1dBm
Receiver Sensitivity – < -11.1dBm
Commercial Temperature Range – 0 to 70°C (32 to 158°F)